China's foreign trade dealer blog   China's foreign trade dealer hengzhang blog

China’s mold industry with the international advanced level, in concept, design, process, technology, experience a wide gap between, on the whole is still in the track, the learning phase, not yet reached the stage of development of information technology manufacturing, management and innovation. only at the middle level of the world, compared with the international advanced level, there are about 15 years or so gap, mold-line testing and information management gaps in more than 15 years. “Recently, the Secretary-General of the China Mould Industry Association WU Bing China Mould Industry Association 2011 Conference frankly.

The mold is the basic industries of the national economy, in a sense, the level of development of mold industry on behalf of a country’s level of industrial development. Focus on the development of the automotive, electronics, communications, aerospace and other industries in more than 80% of the parts is molded by the mold. The participants believe that the “Eleventh Five-Year planning for the sector as determined by the mold level in China has reached total target of 2010 to enter the ranks of the advanced level in Asia”, despite the remaining gap with the international advanced level, but “Twelfth Five Year Plan” will bring huge opportunities for the development of China’s mold industry.

To achieve new breakthroughs

China to become a manufacturing country, the domestic mold industry in recent years has been rapid development. According to incomplete statistics, the overall output value has exceeded 100 billion yuan. In the case of Beijing, existing mold companies to reach more than 200, can produce hundreds of thousands of sets of molds per year. Die Association in Beijing, Beijing’s focus on the development in the automotive, electronics, energy saving and environmental protection industries require large amounts of mold support, greatly promoted the rapid development of the mold manufacturing in the Beijing area. Although the Beijing area mold the development of enterprises in different ways, but still emerged BYD Auto stamping dies, the Great Wall Peony plastic extrusion mold, Condi Puri precision multi-position progressive die representative enterprises and products.

According to the person in charge of an IT mold companies, the IT mold has considerable basis in the country, and has been the introduction of foreign advanced technology and equipment, the products of individual enterprises has reached the world level, but most enterprises still a wide gap . LSI package, lead frame supporting the terminal pin 100 and the following gap 0.2mm, the accuracy of 5mm or more precision miniature connectors supporting core supporting the following diameter 1.6mm micro-motors and tubes and electronic matching precision mold development priority.

China Mould Industry Association data, you can clearly see that the gap between China’s mold and the international advanced level. Such as mold precision, the international advanced level has reached the sub-nanometer to micron level for the domestic advanced level; mold the highest life expectancy, international and efficient precision multi-position progressive die to reach 500 million, precision die 40000, injection molding modulus of 20 million, while the corresponding domestic mold can only reach 300 million, 20 000, 10 million.

Planning to bring new requirements

WU Bing from China in recent years the level of mold development, mold the new structure, new varieties, new techniques, new materials innovations continue to emerge, the number of patents increased. In particular, the Ministry of the end of 2011, the mechanical basis, the basis of the manufacturing process and the basic materials industry “12th Five-Year” development plan “(hereinafter referred to as the” base “plan) will bring a tremendous opportunity for the development of China’s mold industry.

It is reported that, machine parts, the basic manufacturing processes and basic materials are the basis of the survival and development of equipment manufacturing industry, its level directly determines the performance of major equipment and a host of products, quality and reliability. Mechanical foundation is composed of the basic unit of the machine can not be split, including: bearings, gears, hydraulic parts, hydraulic components, pneumatic components, seals, chain and sprocket, transmission links, fasteners, springs, powder metallurgy parts, mold ; basic manufacturing process refers to a wide range of mechanical industrial processes in the large versatility of casting, forging, heat treatment, welding, surface engineering and machining and special processing; basic materials specifically required machinery manufacturing volume, special high-quality specialty materials.

The “base” plan in the focus of development proposed around the major equipment and high-end equipment supporting demand, China will focus on the development of the 11 categories of machinery foundation, the basis of six categories of manufacturing processes and basic materials. Focus on the advantages of resources, focus on developing 20 kinds of iconic machinery foundation, 15 iconic basic manufacturing processes and 12 kinds of iconic basic materials and industrialization. Large, sophisticated, efficient and multifunctional molds, high-end passenger car body and car (ultra) high-strength steel plate hot forming mold, high-speed precision multi-position progressive stamping dies, no trace of the high-gloss laminated rotating large plastic mold, ultra-large-scale IC lead frame and large plastic mold of a large ultra-thin LED, multi-material multi-cavity precision electronics, medical device plastic injection molds, large OTR tire Rubber & Plastics mold, high-precision light metal die-casting mold, the focus of development.

WU Bing revealed that 20 kinds of iconic machinery foundation mold labeling products in the following two categories striving to achieve breakthrough: First, the C-Class sedan overall body forming mold. Realization of the door, front fender surface shape accuracy of 0.08 ~ 0.05mm, the structure of the surface accuracy of ± 0.05mm, to pay more to match the mold assembly size and control (including rebound control) within the contour accuracy of ± 0.7mm or less, the outer contour accuracy of ± 1.0 mm within the assembly between the docking accuracy of ± 0.5mm or less, the body overall dimensional accuracy at or close to 2mm. The second is the high light trace, laminated rotating large plastic mold. Development of width 1200 mm and above, precision molds, u level, mirror finish of the mold cavity A0-A1 level, the mold assembly precision ≤ 0.02 high light trace, in-mold decoration technology, super ultra-thin LED mirror, complexity, efficient and sophisticated automobile engines The plastic intake manifold precision plastic injection molds; heating thermostat gating system error is less than 0.02mm, the heating temperature of ± 1 ℃, H7/g6 precision slide with stack molds injection efficient production.

Review of China’s mold industry in recent years, the International Model Association Secretary-General Luo Baihui the Lord is good overall level of development of China’s mold manufacturing, enterprise level of processing has been greatly improved, greatly enhance the export capacity, both in the domestic market and resist living overseas manufacturers squeeze pressure, but also showed strong competitiveness in the international market.

At the same time, domestic mold companies in the development process also Pulu Chu some problems, First, the small scale of the technology low in the areas of stenosis, four little capacity to promote the impact on the related industries. Taking all these factors, the overall effectiveness of the domestic mold manufacturing industry did not play the best level of its basic role in the economy of the country name is not yet clear. Luobai Hui pointed out that the order to reverse the above situation, the domestic mold manufacturing but also in order to play a bigger impact in the international market, we must strengthen the integration of industry-wide technology and resources.

First, in the area of ​​technology to strengthen the division of labor

In recent years, domestic mold, although exports increased level of international competition has improved. But are mostly concentrated in the middle and low areas, the low technical level of the mold, low value-added, part of the high-precision mold is also dependent on imports, so the mold manufacturing to strengthen integration in their respective fields, there is no need to transition competition, technological development aspects to implement the division of labor, and related industries and enterprises to long-term perspective, the potential under the mind, pay close attention to new technology, new technology research, and gradually formed a division of labor, collaboration, multi-field, a full range of scientific research and development pattern, the introduction of mold products of independent intellectual property rights in the research process, we must overcome the closed doors and singles lone practice, because the conditions of globalization today, we can stand to do some on the basis of the experience accumulated by predecessors and colleagues prospective study without having to leave the technical work already done by some others, lead to the talents and resources to waste.

The second is to accelerate the application of information technology

To be cordial to flexible specialized manufacturing platform continue to meet customer demand for personalized at the same time, improve their scale and specialized manufacturing level. Mass customization is a breakthrough in the traditional scale of production, it overcomes the single, small bulk and scale of the dilemma of topics to enhance the market competitiveness of China’s mold to create the conditions. ERP successful application has been part of the mold manufacturing enterprises had a demonstrable effect, provides the possibility for mass customization production. ERP technology not only control the manufacturing company itself, but also management extends to customers and suppliers, it will be possible to drive the mold industry and common development.

Must implement the whole process of supply chain systems management, and change the past that large, even small and complete production operations. The traditional manufacturing method of the domestic mold companies generally to the core, cavity, to a screw alone own design and production, resulting in the Front is too long, too small quantities, not only a waste of effort and resources, can not be guaranteed in every The links can have a senior professional standards.

This from the Shenzhen Association of Machinery Industry statistics show that in 2011, Shenzhen machinery industry total output value of 420 billion yuan, accounting for nearly 20 percent of the Shenzhen industrial output value, maintaining the position of the second largest manufacturing industry in Shenzhen, Shenzhen and even global industrial economic development important technical and equipment support.

Shenzhen was the world’s leading manufacturing base after 30 years of development, and encouraged a large machinery industry industries, especially in the mold manufacturing, Shenzhen advantages are clear. According to reports, Shenzhen mold production accounts for about 40%, “mold” reputation.

According to the person in charge of the Association, the Shenzhen Machinery Industry has a strong industrial base, but compared with the level of technology of Germany and other developed countries remained backward. Today’s world, the equipment manufacturing industry toward the development of large-scale, fine direction, the mold industry upgrading and transformation of the mainstream, comply with this demand, Shenzhen Machinery Industry is also accelerating the pace of transformation and upgrading. For example, to speed up the cooperation with the international machinery manufacturing giant; the establishment of industrial clustering in Huidong.

At present, Shenzhen enterprises engaged in precision machining, mold manufacturing, machine tools, there are 12,000 more than 850,000 employees, at the same time, a number of Fortune 500 companies to invest in this set up factories in the industrial chain supporting the formation of precision machining, machine tool consumption market demand, promote the rapid development of the precision processing and manufacturing, these factors promote the transformation and upgrading of the machinery industry in Shenzhen.

Shenzhen machinery to rely on technological innovation

How to get to Shenzhen, China’s “mold” to the world, show a number of mechanical industry experts believe that mold companies to win in the end markets, research and innovation, must be carried out to establish their own brand products.

Experts, mold machinery manufacturing industry to keep pace with the national strategy, the needs of emerging industries, need to market segments, target customers, diversification, and to mold manufacturing as the core, to adapt to the automotive, appliance, shipbuilding and other high-end equipment manufacturing high threshold for this demand.

Shenzhen Machinery Industry Association, Zhang Yaohua, believes that the mold industry to change the development mode, we must focus to improve product quality and reduce manufacturing costs, vigorously develop high value-added products, to go fine, specifically, “route, in the Blue Ocean “create a new growth point.

In recent years, China mold and die development speed quite quickly. With China’s car, home appliances, electronic communication, all kinds of rapid development, the future is expected to die is a huge potential market.

With the development of  Hardware and mould industry in our country, the mould material the quantity, quality, variety and performance is proposed as higher and newer requirements, die material market is rapidly development.

Generally speaking, at present our country die material market still lag far behind the needs of the development of the mould industry. According to JinMo nets CEO ROM the fai introduction, mould with materials include range is very wide, from the general carbon structural steel, alloy steel, carbon steel, alloy steel, high speed steel, stainless steel, martensite steel limitation to hard alloy, difficult to gold, high temperature alloys, the fusion of non-ferrous metal, all can choose, the major belongs to the tool steel alloy steel. At present, China alloy tool steel production has the highest in the world, of which about 100000 tons of steel alloy. China mold and die industry consumes die material add up to 300000-400000 tons, including alloy steel mold for 130000-150000 tons. And the general quality of die steel, high quality mould steel less, a part of the requirements of high steel mold all need after vacuum refining and electric slag remelting, to ensure the high grade steel, high send density, higher to sex, and through the power of the steel slag re-melting the share of very small. The steel market is about 80% black round rod, the user to get the material to change after his forging restructuring, low material utilization ratio, long production period, can not adapt to the needs of modern mold manufacturing industry.

ROM. The fai said, in the mold manufacturing cost, material costs often accounts for only of the mould cost of about 20%, but the competition is die and mould industry use efficiency of the competition, and not to die material low price to win, so to demand higher long life mold, in selecting mould material, often need to keep improving. For example the carbide not uniformity for 5 6 levels of Cr12MoV steel manufacturing stretching mode, service life is often less than 10000 pieces; And adopt copper alloy die material manufacturing stretching mode, service life can reach 70000 pieces or more. This is because the copper alloy die material of the thermal conductivity, can guarantee the mould temperature distribution work uniform, won’t because local high temperature make mould crack, also won’t make stretch product surface appear cold welding to take off the mark and wrinkling phenomenon, not only shorten the mould opening time, improve die life, and also to improve production efficiency and product quality. As we have learned, at present the copper alloy die material has been successfully applied in the drawing die stainless steel plate, aluminum alloy die casting die, plastic injection mould, copper alloy gravity casting and low pressure casting mould, glass bottle manufacturing mould and so on, and is about to replace the traditional steel and cast iron, mould material is a revolution in the field.

At the moment, the domestic advanced materials are not adapted to the needs of the mould manufacturing, a lot of high performance and long life, delivery date of the mould pressing still have to the imported advanced materials. And the imported materials price is high, the price of material than domestic high 3-5 times. To this, the ROM the fai believes that the current should strengthen the mould material enterprise and mould manufacturing enterprise collaboration. For the exploration and development of die market is a system engineering, mould material requirements of the development, production, sales and Marketing Department and die design, manufacture and use of mould department to organize, vigorously synergy, feedback the mould manufacturing and use aspects of the problem and requirements, development and manufacture, technical consulting work and work before and after sale service work, to promote the stable quality of high performance die material of application, make our mould material quickly to catch up with the advanced world level, promote the rapid development of die and mould industry is in our country.

Numerical control technology is making mould industry to digital age; In the foreseeable future, mould industry will digital age to the intelligent by age.

At present, China daily hardware industry has entered the world. China’s hardware industry, there are at least 70% of private enterprises, the main force for the development of China’s hardware industry. China has gradually become the world’s largest metal processing and exporting country, and has become one of the big countries of the world’s metal production, with a vast market and consumption potential. Careful understanding of the difficult to find, the development of the Chinese hardware toolset tool in roughly a trend.
First look at the hand tools market: the increase in demand for German hand tools. In Germany, the most popular comfort and effortless tool. Smooth handle and pleasant appearance helps to grip tools are an important factor to attract their desire to purchase. Terms of tool types, power tools become increasingly popular. In addition, the cordless tools are becoming increasingly popular. The new cordless tools are sold on the market now have multiple rechargeable battery jack can be used in various environments.
U.S. hand tools market demand is stable. The end of the scale of the housing market new homes to increase at the same time, the United States is still a lot of existing homes uninhabited, a great deal of the housing renovation market opportunities. Average models of motor vehicles and age is getting bigger, and played a certain role in promoting sales of hand tools for automotive aftermarket. In addition, the strong demand for electronic products distribution of the forging tools, especially adjustable wrench.
Taiwan hand tool industry to adjust the product structure. In Taiwan hand tool industry, with stable product quality, on time delivery, product range, in line with customer demand, have certain advantages in the world. Taiwan hand tool sales to off-island market-based, local manufacturers of about 5000, are located in the central region of the island of Taiwan, medium and small enterprises. According to the survey data to look at the product categories of individual hand tools, the sleeve for the export of bulk, followed by a combination of hand tools, and the third for garden tools, wrenches fourth, fifth Pliers. Exporting countries, the United States ranked first, followed by Britain, Germany and Japan.
The look tool market: the tool market demand around the world will continue to grow. According to reports, the tool market demand worldwide is growing. Europe, North America increased stability, especially in Eastern Europe; a slight rebound in Asian markets, market potential, the Latin American countries, the market is significant growth, especially Mexico. (In the past year, the reason why tool market demand growth is slow, mainly due to an increase in tool life, and then request for the entire manufacturing process, replacing the many machine tool and tool as well as the increase in the application of multi-function tool, alternative future users will be more emphasis on research and development of the production plant on the tool, not only in the field of materials and surface coating technology, but also tool products and their production process, a lot of past simple single-function tool.) experts predict: . The experts say the focus on production practices that will help the tool manufacturer to increase the market competitiveness of the areas they are familiar with.
Technical aspects of the update. Tool products, carbide cutting tools are gradually replaced by high-speed steel cutting tools, especially circular tool. The application of coated tools is becoming increasingly common in Europe, high-speed processing of new cutting tool market share is growing. The dynamic of the manufacturers. Combination of many large companies from the way view of the tool manufacturer in the market of high-tech field.
Mold the market situation and development trends: 15, the general trend of the mold market is steady upward. At present, the domestic market for high-grade die in great demand, but requires that the domestic mold quality, delivery and other aspects to meet the needs of users. Moreover, the appliance, automotive, plastics industry, the mold needs. International markets: In recent years, industrial countries, labor costs increase, the positive developing countries, especially Southeast Asian countries transfer. Its domestic production of high precision molds, manual labor input, the large amount of mold to rely on imports. Therefore, the middle and low mold international market potential is huge. As long as the quality of domestic mold can be improved, the delivery time to ensure that the mold for export prospects are very optimistic. In addition, the international market is also a great demand on the shelf and mold standard parts. At present, China only on the frame in a number of a small amount of exports.
In the new wave of world economic integration, global manufacturing to accelerate the transfer to the mainland China is the trend, China will gradually develop into a world-class manufacturing base. Experts predict that the obvious advantages in Guangdong, especially the Pearl River Delta region will be developed within a decade to become the world center of mold. Meanwhile, in recent years in China each year with nearly $ 1 billion of imports mold, including precision, large, complex, long-life mold the majority, so starting from the perspective of reducing imports, the proportion of sub-quota for these high-grade mold, hardware and tools in the market will also be gradually increase.

More and more homeowners, do-it-yourselfers, builders, landscapers and are making their own stone manufactured today. Now you can make the stone, tile, brick and cobblestone for a fraction of what they had been buying for, thanks to companies that manufacture and market concrete forms directly to consumers and merchants on the Internet. And now you can make these products right in your garage construction, basement or shed for pennies each!

Here is some general information about rubber molds for plastic and stone, tile and brick and paving stones at home.

— First, most of the molds, or molds, available to the homeowner and do-it-yourselfer are made with some kind of semi-rigid plastic to make them affordable, easy to use and easy to get. Commonly used plastics are ABS (acrylonitrile butadiene styrene) and polystyrene. Instead of entering the chemical analysis of different plastic materials used, suffice it to say that all work well, and with a much lower cost to the category of rubber mold.

The cost, availability and the number of different elements that seek necessary for a project, or performance, are often the determining factors in the use of any molds rubber or plastic molds. The MOULDS MOULDS term can be used interchangeably either spelling is acceptable by the way.

Rubber or plastic? Use the right tool for the job. There are a number of companies that supply various plastic molds and materials. As an example, TheMoldStore.com has 0,060 or 0,080 molds HI Industrial polystyrene and ABS plastic for many years. Was changed to ABS plastic as its primary a few years ago. ABS these molds are designed to produce 100 or more poured or pieces each. Some manufacturing companies are still using only polystyrene, but polystyrene does not hold to UV rays and makes the ABS, which shortens the useful life

Plastic molds are an excellent and inexpensive alternative to the high costs of rubber molds that are designed and priced especially for high volume commercial production of the same design over and over again. So if you need a unique design, style, texture or size, you will have hundreds of note the initial extra cost of a rubber mold. For lighter texture elements like bricks, paving stones, a stone, and most of the tiles, plastic is the way forward. The low initial cost should your primary consideration.

A great advantage of rubber molds is that they offer the benefit of duplicate items with a master undermined, as statues and very heavy texture, due to its flexibility in molding. There are different views on plastic molds and rubber molds for double the capacity of a consistent texture though. There is no doubt that a rubber mold will do a better job if you want to duplicate a stone texture that offers a very high or deep. One school of thought believes that, while the rubber provides a much more texture at first, the question arises — gum will disappear, because it is softer than plastic? Is it appropriate, give less and less duplication of the original model as the concrete wears away the softer rubber? Which of the designs that begin with soft textures? Is the additional cost of rubber worth it if you only need a hundred of the same subject? And as a style of stone like river stone begins as soft … should spend the extra money in a rubber mold, plastic, when you do well, and at a fraction of the cost per square meter of a rubber mold? These are legitimate questions that you need to ask yourself.

One of the biggest advantages of using molds or molds of ABS, is offering a very competitive price “cost per piece made” compared to the rubber molds. The logic of the market and the reason for most of the plastic mold companies is, “Why pay the high cost of a rubber mold designed to make 500 pieces of the same design, when you can have five ten or more different mold designs that can do more than 100 pieces each for the same cost? Basically, it breaks into many pieces of each design or style of mold that you need for your project.

The main consideration with rubber molds is the cost factor. The materials and workmanship as rubber molds the corner and rubber molds, including planes, out of reach of most of what they do-it-yourselfers, homeowners, and nobody but large volumes commercial producers of stone and pavers would be willing to pay. When you consider that a rubber mold to make a linear foot of corner stone can cost as much as $ 75.00, you can understand why most DIY project with a stone, which seeks an economical alternative to the corner and flat stone molds rubber.

The theme is basically a matter of cost efficiency. Mold and mold companies Olde World and other big companies that make plastic molds molds are giving consumers an inexpensive way to make your own stone veneer, tile, brick, pavers, etc, for pennies instead of dollars to pay square foot. But both areas are limited to flat or slightly curved to cover most of … no corners. If companies including molds molds corner with its low-cost flat stone, tile, brick mold and sets the prices of the mold assemblies would not be so reasonable. And no need! There are easy ways that the typical do-it-yourselfer can avoid the problem of mold corner to make your own stone, bricks, tiles or in an installation.

In another article — WHAT TO DO WHEN YOU NEED THE CORNER STONE, we address a number of different ways to move around the corner mold problem. For consumers who make and install your own stone, brick and tile, when the corners are part of the project, there are inexpensive alternatives that virtually anyone can use. — Where there’s a will there’s a way.

Natural disasters like floods can make our home a dangerous place due to flood damage and mold remediation. It is important to clean all affected areas of the house thoroughly to make the place safe from any danger to health. We must be careful when we return to our home after flood damage to avoid any accident or mishap. The following guidelines can help ensure their safety and welfare before returning to his home after a natural disaster like flooding.

* Avoid the place clear of all debris and wet mud as soon as possible, keeping your safety in the top of the agenda.
* It is preferable to hose down all the walls, floors, household items such as furniture and other items affected by the floods that may have accumulated with the contaminated water and debris. A wet and dry vacuum comes as a very useful tool for this process. Using a solution of detergent and hot sudsy water can help in the purification of the elements and the affected areas until clear of all debris. For rough or uneven surfaces, try cleaning with the help of a cleaning pad and rinse with cold water several times.
* Always wear protective clothing and rubber gloves when doing the cleaning process after flood damage to ensure their safety.

* Inspect all possible corners, drawers and other dark places to detect the possibility of restoration of moldy documents and restoration of mold, and to find a house quickly and easily in places that are damp or wet with excessive moisture and high levels of moisture.
* When the mold is detected, always be careful before proceeding to remove these contaminants out of your home. Always wear a mask or respirator and check first cleaning a small patch of mold. If you suffer from respiratory problems, then it is best to hire a professional for this job.

* To remove the mold completely from home especially after flood damage, is par excellence to reach the source of the mold. Maximize the flow of air from the house, opening all doors and windows of the place. The cross ventilation will help in reducing humidity and moisture from the house. Use fans and dehumidifiers to control excess moisture in the area. Only then can you make your home tight seal mold and mildew.
* Do not forget to disinfect the entire area affected by mold and the area clean to prevent mold  General Mechanical Components from returning back to the place.

* If your household items such as stuffed toys, pillows or mattresses have become significant damage as a result of staying in dirty flood water, then immediately be ruled out and throw it away in a safe place outside home to avoid any health problems at a later stage.
* It is best to discard away from a carpet that has become affected by excessive mold growth such as cleaning or drying does not remove mold from the carpet.
* After you are done with the damaged material at home, the following is to disinfect your home with a good disinfectant, more preferably with a solution of one and a half cup of household bleach added to one gallon of water.
* An important thing to consider after flood damage is to keep the area clean and well ventilated to return to their home safe for you and your family.

Flood damage can make you stressed and tense. However, following these tips can help you recover from flood damage and make your home free of all potential hazards.

DMG quot German Siemens, Mitsubishi Electric Mill Hardinge machine tools from Shenyang Machine Tool Machine Tool Group ACL Hangzhou Guangzhou Pan Wong NC NC Machine Kane Tello Imperial Seiki Shanghai Lin Shihao Isca mold tool quot fall in November a series of hardware and mold known domestic and foreign brand will debut quot China Machinery Hardware Mould Town Dongguan City Changan quot The high-profile seventh Chang 39 China International Exhibition hardware molds machines known as long-term exposure will be November 22 2007 in the international mechanisms of Dongguan City Die Poly and hardware of a museum and Evergreen Dongguan International Plaza B Machine Tool Hall opened now quot quot the long exposure of the preparations in full swing A very bright scene characteristic of the great feast of international metal mold can be expected machinery br br cities and promote the industrial development of the People s Republic of China 39, approved by the Ministry of Science br br Machinery Industry Federation China Economic and Trade Commission Guangdong Province and Dongguan Municipal People’s Government 39 s of the Government of Dongguan City Changan Dongguan City Hardware Machinery Mould Association of Dongguan City Liby Group Company Fonda Group Co and Co Ltd Dongguan City quot the contractor death of the city and equipment in China as the quot quot theme of the Seventh China Chang 39 hardware machines Moulds International Exhibition quot be November 22, 2007 25 days quot China Machinery Hardware Mould City quot and poly Changan Town International Machinery Dongguan City center hardware mold and Evergreen International Machine Tool Hall Plaza B These poly and Dongguan International Machinery Hardware for the city of Molde A place for the construction of the opening ceremony br br learned Changan metal mold Dongguan City exhibition was opened in 2001 after both the sixth consecutive hit show expanded year by year gradually increased force exhibitors to show China’s annual teams, 39 s 39 s of manufacturing quot quot Heroes and hardware from China, 39 s of machinery mold industry one of the most influential professional exhibition exhibition Exhibition of 120 000 mA total of 1 600 booths divided into processing machinery and molds metal accessories exhibition and exposure of hardware accessories and automation exhibition halls and other control functions of eight exhibitions is expected that about 300 000 people approach br br Industry experts have conducted over six sessions of exposure quot quot time not only to the city of Dongguan Changan famous metal mold industry, but also through the exhibition highlights the hardware industry and mildew City Changan this topic has attracted domestic and foreign machinery manufacturers metal Mold and buyers quickly gathered in this land of magic to become the South China Changan City of machinery tools and hardware distribution center for small commodities trading city has been named Changan quot China Machinery Hardware Mould quot quot City Torch Plan of Guangdong Province first characteristic of the mold industry base quot quot Guangdong Hardware Industry Cluster Upgrade Demonstration District quot quot Die State Torch Program mold industry base quot br br feature International Exhibition bright scenes to highlight the innovative activities has often been reported that long exposure quot quot will focus on the implementation during the quot quot quot a major summit and market new products 10 and quot technology conference, including including the 2007 quot Second Cross quot narrow mold Dongguan Technology Summit will meet in the machinery and the city of Dongguan International Mould hardware opening the March 2 China Academy of Engineering of the mold level team experts led by guest speaker will be invited to participate in the general manager of the famous mold company and the industry of nearly 1 000 to discuss global trends in the context of mold addition, Mitsubishi Electric DMG German Machine Tool Shenyang and other famous companies will launch over 10 new products and market the technology industry conference and focus technology with exhibitors and buyers to conduct in-depth exchanges of br br B full ad three dimensions Organizing Committee spent more than a billion between September and November in Guangdong CCTV and other media to publicize and promote the well-known characteristics of the cast metal industry and exposure Chang At the same time, by execution of advertising sending invitations outdoor advertising and information guide Fitipaldis show and other information direct to show to prospective buyers at home and abroad to promote efforts to expand that in earlier times br br C professional associations participating organizations as the Association of Machinery of China Taiwan, mold Die Industry Association amplifier Federation of hardware power amplifier Guangdong Provincial Association of Federation of hardware electric amplifiers Guangdong Provincial Association of Industry Associations molds and other professional associations will be issued a document to mobilize and actively invite companies to visit the acquisition of this exhibition will also be in Germany, Britain and Korea Japan other foreign cooperation and partnerships to support addition, the Pearl River Delta region will be organized shoe mold electronics auto parts form buying groups etc. to reach the well-known companies br br D acquisitions to accelerate the pace of internationalization of the exhibition highlights professional quot international market and brand exposure quot of the ideas of the breeze began to DMG Germany’s Siemens, Mitsubishi Electric Haas Hardinge positive response from international brands such as special displays composed of rule of long exposure quot quot international brand area of ​​Vietnam Mechanical Engineering Society Association of the Vietnamese Association mold mold mold Thailand Singapore, the Association of Machine Tool Association India will also work with strategic alliances quot quot long exposure and organizations to organize a delegation of foreign multinational purchasing groups br br At the same time, the seventh quot quot long exposure Organizing Innovation breeze quot thinking of going to the strategy quot take the international route to strengthen Germany, France, Belgium, Switzerland and other industry associations developed European manufacturing and marketing a large multinational advertising, a global presentation of China quot Machinery Hardware Mould Town quot style industrial and promote the brand image of the Seventh China Chang hardware 39 Exhibition International Mold machines br br Chang 39 2007 Seventh China International Exhibition hardware machines Mold will hit sixth exhibition in the show based on the complete results of transactions to expand internationally renowned companies as the main speakers set Yishanghuiyou bridge promote the industry mold hardware and new Changan advantages as well known international brands in the number of exhibitors and professional buyers number of participants in the commercial aspects of the total maximum to create new quot quot international brand of occupational exposure cause of the 39 hardware and Chang struggle quot distribution base in China quot mold.

Products molded silicone rubber is used in a number of applications in daily life. Many of them involve silicone rubber keypads. Sometimes they are on hand without people even realizing it. Here are 10 places where you used injection molding of liquid silicone in daily life for ordinary and extraordinary devices.
Cell Phones – Smartphones today and portable electronic devices are more durable than it used to be. A cover of liquid silicone injection molding wraps around the device to keep it safe from scratches and falls.
Alarm system keypad – commercial and residential alarm system rubber keyboards use of its controls. When safety codes and functions are under pressure to activate and deactivate the system, the user can feel the keys you press and see the numbers and symbols in rubber keypads. Ink backlight and lasting impression laser or make images clearly visible and usable.
Remote Control – Remote control panels are used for a number of different electronic devices. Backlighting is a popular option that allows the keyboard lights up when the keys are depressed.
Fitness Equipment – Working at home is growing in popularity. Fitness equipment with rubber grips molded by the hands helps consumers to safely use the exercise machines.
Garden machinery – two control pads and various parts of the molding of rubber garden equipment function. If the hand grip of a brush cutter or levers of control and monitoring of a rock fan, the pieces of liquid silicone injection molding can withstand the rugged environment of landscape use.
Strollers – For parents who like to take their children in the stroller, rubber grips are easy to mold in your hands, especially on a hot summer day.
Keyrings – These are made in any shape and style. They can be personalized with company name and logo as a marketing tool.
Coffee – The soft top colors and a ceramic coffee cup conforms to the base without leakage. The lid provides an opening large enough for drinking. It is suitable for microwave and dishwasher washable.
Cookware – For modern cooks, injection molding liquid silicone has created a new style of baking. Bread muffin cups, pots and pans are safe for oven, refrigerator and microwave.
Feathers – For people who use ink pens on a regular basis, molding rubber near the base of the pen gives a non-slip grip that makes writing easier. Some styles have a colored or opaque, allowing the user to see the amount of ink in the pen.

Rubber molding is a common material found in many everyday objects. In fact, components and parts manufactured from molded rubber materials can be found almost anywhere you look. To get an idea of ​​how pervasive these items are, take a look around your house or apartment. As you browse around, you probably will notice that the rubber molding can be found in many modern appliances that make life more efficient. In addition, these items can also be found in heating and cooling that make it more comfortable. When you need to get from one place to another, you can thank the rubber parts that keep your personal vehicle running smoothly or doing airplanes, buses and commuter trains to operate safety.
Undoubtedly, molded rubber parts are integrated into many aspects of our lives. However, you may wonder what impact molding rubber components in the environment and if the product of these parts is consistent with the trend toward greener technologies. As the demand for more organic products continues to grow, manufacturers need to address these problems have a competitive advantage over those who do not.
2 Ways to molding rubber components are becoming more environmentally friendly
Although it is difficult to answer these questions definitively with respect to all types of rubber molding and in all manufacturing environments, there are two specific areas where significant advances have been made. The first indicates the rubber molding provides a direct benefit to the environment, while the second examines how the steps are being made to improve the process of rubber production in a manner respectful of the environment.
Over the years, there have been many advances in the production of molded rubber. Scientific advances have resulted in stronger rubber compounds which are more durable and resistant to severe operating conditions. These developments have led to the components of more durable rubber molding. Extend the life of each component means that fewer items end up taking up extra space in landfills and dumps. In addition, the strengthening of rubber formulations means that not only own rubber components last longer, but also the performance of their jobs better, while in operation. This means that they offer greater protection to the surrounding areas, which in turn may lead to less broken and discarded glass and metal parts.
Advances in the rubber molding way there was also creating a more favorable impact on the environment. In recent years, non-stick products designed to work with the unvulcanized rubber compounds have been introduced. These products are useful in the production process of molding rubber because it make it easier to remove the rubber parts of the mold without damage or discoloration of the final product. These latest solutions are water based and offer low toxicity because it does not include heavy metals or silicon powders. They are free of volatile organic compounds (VOCs). These compounds are known to have a negative effect on air quality and may cause long-term health problems for those who inhale. Therefore, removing them, of course, creates a production process more environmentally friendly.

Molded rubber products adds great value and functionality to our lives. Fortunately, now also contributing to the overall health of our planet.